Difference between revisions of "Firmware-810 Message-033"

Revision as of 02:27, 11 December 2018

This message contains the WiDig SOLO status. See the SET SOLO command for more information on the SOLO feature.

The [BODY] of the SOLO message is as follows:

0yxxxxxx:	xxxxxx = [0..63]; sensor input
	y = [0..1]; 0: disable, 1: enable solo for the sensor input

@@ Line 4: / Line 4: @@
 The [BODY] of the SOLO message is as follows:
+{|
+|0yxxxxxx:
+|xxxxxx = [0..63]; sensor input
+|-
+|
+|y = [0..1]; 0: disable, 1: enable solo for the sensor input
+|}