Difference between revisions of "Firmware-75 Command-013"
(Created page with "==DUMP INTERVAL (13, 0Dh)== The DUMP INTERVAL command can be used to retrieve the sampling interval of the sampling loop in the USB-microDig. The command can be used in both...") |
(No difference)
|
Latest revision as of 21:13, 4 October 2017
DUMP INTERVAL (13, 0Dh)
The DUMP INTERVAL command can be used to retrieve the sampling interval of the sampling loop in the USB-microDig. The command can be used in both host and stand-alone modes of operation. Upon completion of the DUMP INTERVAL command the USB-microDig sends out the same message as the INTERVAL command.
The DUMP INTERVAL command has no [BODY].
Example:
- 240, 125, 0 {DEV}, 13 {DUMP INTERVAL}, 247 (F0h, 7Dh, 00h, 0Dh, F7h)
