Difference between revisions of "Firmware-640 Command-111"
(Created page with "==LOW POWER THRESHOLD (111, 6Fh)== This command requests the Wi-microDig to send out whether or not the low power threshold has been reached. Upon completion of the command t...") |
(No difference)
|
Revision as of 04:47, 20 July 2020
LOW POWER THRESHOLD (111, 6Fh)
This command requests the Wi-microDig to send out whether or not the low power threshold has been reached. Upon completion of the command the Wi-microDig sends out the LOW POWER THRESHOLD message.
There is no [BODY] for the LOW POWER THRESHOLD command.
