Difference between revisions of "Firmware-73 Command-101"
(Created page with "==DUMP NAME (101, 65h)== The DUMP NAME command is used to obtain the name of the current configuration of the USB-microDig. Upon completion of the command the USB-microDig se...") |
(No difference)
|
Latest revision as of 03:45, 12 November 2016
DUMP NAME (101, 65h)
The DUMP NAME command is used to obtain the name of the current configuration of the USB-microDig. Upon completion of the command the USB-microDig sends out the NAME message.
The DUMP NAME command has the following [BODY]:
| 00000001: | 1; configuration number |
